Primacy og Zenius - Hvordan rense printeren

The cleaning LED warns you when you need to clean the insides of the printer (every 1000 cards processed).
Passing the adhesive card repeatedly through the printer cleans the cleaning roller. This removes any residual dust found on the front and back faces of the cards before they are introduced into the printer.

  1. Open the printer cover.
  2. Remove the ribbon from the printer if present.
  3. Close the cover and check it has clicked shut.
  4. Open the feeder.
  5. Remove any cards present in the feeder.
  6. Using the gauge, set the card thickness to the MAX position.
  7. Peel off the film from a new adhesive cleaning card supplied by Evolis.
  8. Double-click the control panel’s pushbutton.
  9. Insert the cleaning card in the opened feeder, adhesive face upwards. Cleaning starts.
  10. The used adhesive card is ejected automatically into the output hopper. Open it and remove the used adhesive card.
  11. Put the ribbon back into the printer, then place some blank cards in the feeder and adjust the gauge to the appropriate card thickness.

 

three floor dress